Root CNC Forum Electronics My Root Configuration

This topic contains 1 reply, has 1 voice, and was last updated by  Amanda Eriksson 3 months, 2 weeks ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #584

    Amanda Eriksson
    Participant

    I think we need some kind of sharing what setup each machine has and whats works so new users easy can see whats needed and what configuration that works.

    #585

    Amanda Eriksson
    Participant

    My Root 3 config:

    Bed size: 80x100cm
    Controller: Ramps 1.4 with with Polulu DRV8825 stepper drivers
    Steppers: Nema17 17HS19-2004S1 (59Ncm, 84oz.in) for Y and Z axis and 17HS24-2104S (65Ncm, 92oz.in) for the X axis
    Belt: Using GT2 Polyurethane belt
    PSU: 12V 29A

    Spindle: HXKJ-GS52-400W (found on ebay)
    Spindle PWM controller: 12V-60V 10A PWM DC brush Motor Speed MACH3 spindle Controller 12V 24V 48V (Not configured yet, will update when I tried it out)
    Spindle PSU: 48V 10A

    Software: 
    Testing Estlcam, Cambam plus,  and testing the Root 3 with Pronterface

    Other things:
    Mechanical endstops NC (DO NOT USE THIS! Use NO instead! That means I had to edit the Marlin config)
    All 3D printed parts are printed in ABS and a Flashforge Dreamer and Simplify3D as a slicer

     

    This Root 3 is not finished yet so don’t take the above for a working Root 3 yet

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.